Need help finding something to fire my Morris Slave flashes

[theantiquetiger]

I have had these older studio flashes for a couple years and have just been using them as a slave flash. I am trying to figure out what do I need to get to make them sync with my camera.

Any idea?

The sync cords are about 3 feet (1 meter) long, and the ends look like this (three prong goes in the body of the flash
http://i144.photobucket.com/albums/r198/theantiquetiger/Snapbucket/C901E5C4.jpg

There is another 12 foot cord (4 meters) with ends that look like this
http://i144.photobucket.com/albums/r198/theantiquetiger/Snapbucket/A3817F6F.jpg

and here is the back of the flash
http://i144.photobucket.com/albums/r198/theantiquetiger/Snapbucket/0B2281AE.jpg

[JAS_Photo]

Cactus triggers work well with my strobes. You set one up as a receiver attached to the strobe and one as as a transmitter on the camera. The other strobe is set as a slave and it all works pretty nifty. They are around 100$ for a set so not crazy expensive. They have a couple of different attachments to connect to the studio strobes so maybe will fit with yours.

Here is what you get:
Amazon.com : Cactus V5 Wireless Flash Trigger : Photographic Lighting Slave Remote Triggers : Camera & Photo (http://www.amazon.com/Cactus-V5-Wireless-Flash-Trigger/dp/B005DFI5ZY)

[Marko]

I've seen similar wires - why won't the 3 pronged one work?

[theantiquetiger]

Yeah, I now have wireless studio flashes!!!! The three pronged cables did work. I just had to buy 4 Yongnou triggers