Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Lens Sharpness - How to test

This is a discussion on Lens Sharpness - How to test within the Digital photography forums, part of the Photography & Fine art photography category; Does anyone have a process or an idea of a process on how I can test my lens to see ...

  1. #1
    Iguanasan's Avatar
    Iguanasan is offline Moderator
    Join Date
    Jan 2009
    Location
    Halifax, NS
    Posts
    10,917
    My Photos
    Please feel free to edit my photos
    Critiques
    Critique my photos anywhere in the forum

    Default Lens Sharpness - How to test

    Does anyone have a process or an idea of a process on how I can test my lens to see if the softness in my shots is due to my inability to focus or the fact that I'm shooting with a kit lens that just isn't up to the task?

    I thought I was causing blur by having too short a DOF but in this shot. I was shooting F9.0 @ 1/80 which I would have thought would leave a large enough DOF to get both the wings and the body in focus.

    This is an auto-focus shot and I put the spot focus on it's back. I shot a couple of manual focus shots where I made sure I could clearly see the wing structure and still the body was not in focus. If it turns out to be the tool then it's very frustrating. If I can prove it's me making the mistake then maybe I can learn how to correct it.
    “If you are out there shooting, things will happen for you. If you’re not out there, you’ll only hear about it.” – Jay Maisel
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Feel free to edit my shots ONLY for use on this forum and critique my shots in ANY discussion area.
    Flickr | Blog | Google+

  2. #2
    Marko's Avatar
    Marko is offline Administrator
    Join Date
    May 2005
    Location
    Montreal, QC. Canada
    Posts
    14,870
    My Photos
    Please do NOT edit my photos
    Critiques
    Critique my photos anywhere in the forum

    Default

    It's tough to say what happened in this particular shot. It could simply be camera shake if the camera was not on a tripod and you weren't absolutely still.

    Just to be sure, what was the file size BEFORE you uploaded it? Thx - Marko
    - Please connect with me further
    Photo tours of Montreal - Private photography courses
    - Join the new Photography.ca Facebook page
    - Follow me on Twitter http://twitter.com/markokulik
    - Follow me on Google+ https://plus.google.com/u/0/111159185852360398018/posts
    - Check out the photography podcast


    "You have to milk the cow quite a lot, and get plenty of milk to get a little cheese." Henri Cartier-Bresson from The Decisive Moment.

  3. #3
    Iguanasan's Avatar
    Iguanasan is offline Moderator
    Join Date
    Jan 2009
    Location
    Halifax, NS
    Posts
    10,917
    My Photos
    Please feel free to edit my photos
    Critiques
    Critique my photos anywhere in the forum

    Default

    I'll post the full size one tonight via Picasa (and Flickr just to be sure) but I'm sure it wasn't the board as the full size one seems kinda soft when I zoom in on it. I think this one was under the 250KB limit before I posted it. I saved it that way from GIMP.
    “If you are out there shooting, things will happen for you. If you’re not out there, you’ll only hear about it.” – Jay Maisel
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Feel free to edit my shots ONLY for use on this forum and critique my shots in ANY discussion area.
    Flickr | Blog | Google+

  4. #4
    Marko's Avatar
    Marko is offline Administrator
    Join Date
    May 2005
    Location
    Montreal, QC. Canada
    Posts
    14,870
    My Photos
    Please do NOT edit my photos
    Critiques
    Critique my photos anywhere in the forum

    Default

    cool that's what I wanted to know.

    Ok then - other possibilities
    - is it possible the insect moved a tad during the exposure?
    - for macro type subjects depth of field is reduced of course but the part you focused on should of course be tack sharp. I'm not convinced at all that it's even possible for f-9 to cover both wings on yr 55mm.

    On older lenses it's easier to see what distance a given F-stop will cover as the info is often right there on the barrel. You'll want to check the specs of yr lens for this info as well as the minimum focusing distance.

    If I had to bet on this though, I'd bet on camera shake.
    Hope that helps

    any other opinions on this?
    - Please connect with me further
    Photo tours of Montreal - Private photography courses
    - Join the new Photography.ca Facebook page
    - Follow me on Twitter http://twitter.com/markokulik
    - Follow me on Google+ https://plus.google.com/u/0/111159185852360398018/posts
    - Check out the photography podcast


    "You have to milk the cow quite a lot, and get plenty of milk to get a little cheese." Henri Cartier-Bresson from The Decisive Moment.

  5. #5
    F8&Bthere's Avatar
    F8&Bthere is offline Senior Member
    Join Date
    Mar 2009
    Location
    Alberta
    Posts
    495
    My Photos
    Please feel free to edit my photos

    Default

    Sharpness is a tricky bugger. When I've been unhappy with sharpness in my photos in the past, if I was able to eliminate subject movement, camera shake, and DOF issues first, I'd often end up realizing, or being told, I'm expecting too much (ie. pixel peeping). And it was often when I was trying to assess my copy of a recently bought lens. And other times I have found that lighting/ISO made all the difference of a slightly soft shot to a nice crisp one.

    I assume you used a tripod. And if that's the case and if we give the lens the benefit of the doubt here, I'd have to agree with Marko's hunches. But as for the lens quality or possible front/back focus issues, of course it's hard to tell from the size posted here.

    Does it look to you in viewing and zooming in the full size photo that the surface of the log is sharper than the insect? The answer to that question may say a lot. The shot looks good to me but I kinda see what you mean about the insect could be crisper- but to me it looks close enough that a little post processing could make an improvement.

    Edit- oh and to answer the question- how to properly test- I'm betting by the time you read this post you've already googled it and found a pile of resources, like resolution charts you can print off and place flat on a wall, or the ones for front/back focusing (45 deg angle) etc
    Last edited by F8&Bthere; 06-29-2009 at 03:43 PM.

  6. #6
    Iguanasan's Avatar
    Iguanasan is offline Moderator
    Join Date
    Jan 2009
    Location
    Halifax, NS
    Posts
    10,917
    My Photos
    Please feel free to edit my photos
    Critiques
    Critique my photos anywhere in the forum

    Default

    Thanks for the feedback. No, I hadn't Googled yet as I was at work but I will shortly thanks for the keywords. Here is the original (in Flickr and PicasaWeb) for discussion. Maybe it is camera shake since I was not using a tripod, however, it is 1/80s and I believe I'm fairly steady - not as steady as a tripod obviously. Also, this has the lens stablization built in, this is the Rebel XSi and finally, the fence rail looks fairly sharp to me but maybe that's just my bad vision

    Photos below the EXIF

    Full EXIF Info
    ==========
    Make - Canon
    Model - Canon EOS DIGITAL REBEL XSi
    Orientation -
    XResolution - 72
    ResolutionUnit - Inch
    YResolution - 72
    Software - Picasa 3.0
    DateTime - 2009:06:27 15:31:16
    YCbCrPositioning - Co-Sited
    ExifOffset - 216
    ExposureTime - 1/80 seconds
    FNumber - 9
    ExposureProgram - Manual control
    ISOSpeedRatings - 100
    ExifVersion - 0221
    DateTimeOriginal - 2009:06:27 15:31:16
    DateTimeDigitized - 2009:06:27 15:31:16
    ComponentsConfiguration - YCbCr
    ShutterSpeedValue - 1/83 seconds
    ApertureValue - F 9.11
    ExposureBiasValue - 0
    MeteringMode - Spot
    Flash - Flash not fired, compulsory flash mode
    FocalLength - 55 mm
    UserComment -
    SubsecTime - 03
    SubsecTimeOriginal - 03
    SubsecTimeDigitized - 03
    FlashPixVersion - 0100
    ColorSpace - Unknown (0xFFFFFFFF)
    ExifImageWidth - 2880
    ExifImageHeight - 2306
    InteroperabilityOffset - 9588
    FocalPlaneXResolution - 4865.60
    FocalPlaneYResolution - 4876.71
    FocalPlaneResolutionUnit - Inch
    CustomRendered - Normal process
    ExposureMode - Manual
    White Balance - Auto
    SceneCaptureType - Standard

    Maker Note (Vendor): -
    Macro mode - Normal
    Self timer - Off
    Quality - Fine
    Flash mode - Not fired
    Sequence mode - Single or Timer
    Focus mode - MF
    Image size - Large
    Easy shooting mode - Manual
    Digital zoom - None
    Contrast - Normal
    Saturation - Normal
    Sharpness - Low , -32769
    ISO Value - 32767
    Metering mode - Center weighted averaging
    Focus type - Auto
    AF point selected -
    Exposure mode - Manual
    Focal length - 18 - 55 mm (1 mm)
    Flash activity - Not fired
    Flash details -
    Focus mode 2 - 65535
    White Balance - Auto
    Sequence number - 0
    Flash bias - 0 EV
    Subject Distance - 0
    Image Type - Canon EOS DIGITAL REBEL XSi
    Firmware Version - Firmware Version 1.0.9
    Sharpness (0D) - 52341
    File number - 000 - 0000
    Sharpness (A0) - 3


    Flickr (Click to go to the site)


    Picasa (Click to go to the site)
    “If you are out there shooting, things will happen for you. If you’re not out there, you’ll only hear about it.” – Jay Maisel
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Feel free to edit my shots ONLY for use on this forum and critique my shots in ANY discussion area.
    Flickr | Blog | Google+

  7. #7
    Barefoot's Avatar
    Barefoot is offline Senior Member
    Join Date
    Jan 2009
    Location
    Aiken, SC
    Posts
    2,401
    My Photos
    Please do NOT edit my photos
    Critiques
    Critique my photos anywhere in the forum

    Default

    Don't let it drive you crazy, Iggy. Set up a similar shot and use your timer to make a few exposures if you don't have a remote just to make sure you're not causing any movement.

    Also, follow this link for a great chart to test for front/back focus issues and a pretty in depth discussion on the subject..

    http://regex.info/blog/photo-tech/focus-chart
    We don't see things as they are, we see them as we are. -Anaïs Nin

    http://barefoot.pixu.com/

  8. #8
    jlabel is offline Senior Member
    Join Date
    Feb 2009
    Location
    Brazil - Sao Paulo
    Posts
    298

    Default

    The best way to check technical focus is using your camera on a tripod and focusing and shooting a ruler, chose a number and shoot it if the focus is misplaced it may be a lens problem, some newer cameras have the option to configure this kind of problem, also you will be able to see if your lens is sharp enought for you, you should also use f/5.6 or f/8 for this test.

  9. #9
    tirediron is offline Senior Member
    Join Date
    Jul 2008
    Posts
    1,201

    Default

    Basic lens sharpness isn't difficult to test for.

    Print out a page consisting of nothing but the letter 'X' in upper-case, ten or twelve-point size (preferably using a good quality laser printer) and printing as close to the edge of the paper as you can.

    Tape this flat against a wall and using a level, square and tape-measure set your camera on a tripod in such a way that it is exactly square to the sheet of paper with the centre of the lens axis pointing directly at the centre of the paper, and with the camera 1 - 2" further away than the minimum focusing distance wide open.

    Ensure your camera is set to either RAW or the highest quality .jpg posssible and take a series of pictures of the sheet of paper, wide-open, f8 (or mid-range) and stopped down. Now, with the image size set to 100% in your favorite editor, examine the corners and centre of the different apertures. The differences in sharpness should be readily apparent.

  10. #10
    harvey3 is offline Junior Member
    Join Date
    Aug 2009
    Posts
    22

    Default

    I do shot shot and shot to test it!

    this is very good now I have better way of doing it.
    thanks for sharing!

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36