Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Sharpening Advice

This is a discussion on Sharpening Advice within the Photoshop - graphics programs - pluggins - for photography forums, part of the Education & Technical category; I have a new 70-200 2.8L lens that is soft. Unfortunatly I do not have time right now to send ...

  1. #1
    midgett is offline Member
    Join Date
    Jun 2009
    Location
    Florida
    Posts
    31

    Default Sharpening Advice

    I have a new 70-200 2.8L lens that is soft. Unfortunatly I do not have time right now to send it off for a warrenty repair for a few weeks. I need to slightly sharpen a bunch of files from a recent shoot. I find Lightrooms sharpening features to be a bit lacking so I prefer to use unsharp mask in cs4. Is it better to sharpen files as JPEGs or as DNGs? Or does it really even matter?

  2. #2
    tirediron is offline Senior Member
    Join Date
    Jul 2008
    Posts
    1,201

    Default

    Sharpening should always be the last step in post-processing, so it depends on your work-flow, but I would apply it to the .dng rather than the .jpg.

  3. #3
    landon9720 is offline Member
    Join Date
    Aug 2008
    Posts
    37

    Default

    i keep hearing that sharpening should be the last step. but raw files need to have sharpening applied as they are opened. how do you reconcile?

  4. #4
    Mad Aussie's Avatar
    Mad Aussie is offline Moderator
    Join Date
    Dec 2008
    Location
    Brisbane, Qld, Australia
    Posts
    14,098
    My Photos
    Please ask before editing my photos

    Default

    I find the sharpening in LR all but useless. Ata recent seminar the Adobe people admitted as much and said they were working on something more like the PS unsharp mask for future releases.
    I use the Clarity in LR to get a little bit of sharpening then I sent it to PS CS4 and use the unsharp mask after doing anything else I need to. I have no preference over dng or jpg in this case.

  5. #5
    Marko's Avatar
    Marko is offline Administrator
    Join Date
    May 2005
    Location
    Montreal, QC. Canada
    Posts
    14,870
    My Photos
    Please do NOT edit my photos
    Critiques
    Critique my photos anywhere in the forum

    Default

    i keep hearing that sharpening should be the last step. but raw files need to have sharpening applied as they are opened. how do you reconcile?
    Why do you say this, at least for me, that's not how I work. I apply the unsharp mask filter OR the smart sharpen filter only at the end of my post processing.
    - Please connect with me further
    Photo tours of Montreal - Private photography courses
    - Join the new Photography.ca Facebook page
    - Follow me on Twitter http://twitter.com/markokulik
    - Follow me on Google+ https://plus.google.com/u/0/111159185852360398018/posts
    - Check out the photography podcast


    "You have to milk the cow quite a lot, and get plenty of milk to get a little cheese." Henri Cartier-Bresson from The Decisive Moment.

  6. #6
    F8&Bthere's Avatar
    F8&Bthere is offline Senior Member
    Join Date
    Mar 2009
    Location
    Alberta
    Posts
    495
    My Photos
    Please feel free to edit my photos

    Default

    Most of what I've read seems to suggest sharpening can be applied twice when post processing RAW files. In fact I think even Scott Kelby describes in his book(s) a pre-sharpening (not sure if that exactly what he calls it) step upon importing files or as some part of the regular post process workflow. The idea I guess is that if you don't shoot jpeg with sharpening applied in camera, that digital RAW files tend to be way too soft. Many of photographer's images end up living on a hard drive only to be occasionally brought up for display within say Lightroom or whatever. And then the final sharpening can be done at/near the end of post process, upon export, if that image is going to the web or to print. In fact Lightroom has a feature embedded into their export menu that allows you to select low/med/high sharpening for display, and a similar feature in the print module. Though as MA mentions, some photographers may prefer to take their files into Photoshop for this instead of doing within Lightroom.

  7. #7
    Marko's Avatar
    Marko is offline Administrator
    Join Date
    May 2005
    Location
    Montreal, QC. Canada
    Posts
    14,870
    My Photos
    Please do NOT edit my photos
    Critiques
    Critique my photos anywhere in the forum

    Default

    Quote Originally Posted by F8&Bthere View Post
    Most of what I've read seems to suggest sharpening can be applied twice when post processing RAW files. In fact I think even Scott Kelby describes in his book(s) a pre-sharpening (not sure if that exactly what he calls it) step upon importing files or as some part of the regular post process workflow. The idea I guess is that if you don't shoot jpeg with sharpening applied in camera, that digital RAW files tend to be way too soft. Many of photographer's images end up living on a hard drive only to be occasionally brought up for display within say Lightroom or whatever. And then the final sharpening can be done at/near the end of post process, upon export, if that image is going to the web or to print. In fact Lightroom has a feature embedded into their export menu that allows you to select low/med/high sharpening for display, and a similar feature in the print module. Though as MA mentions, some photographers may prefer to take their files into Photoshop for this instead of doing within Lightroom.
    I'd be interested to know more about this pre-sharpening and if others process in this way.

    Raw images are softer when you open them it's true; BUT I can easily tell TRUE softness (like when the eyes are not perfectly sharp) when I open up the shot in bridge and I assume it's the same for lightroom.
    - Please connect with me further
    Photo tours of Montreal - Private photography courses
    - Join the new Photography.ca Facebook page
    - Follow me on Twitter http://twitter.com/markokulik
    - Follow me on Google+ https://plus.google.com/u/0/111159185852360398018/posts
    - Check out the photography podcast


    "You have to milk the cow quite a lot, and get plenty of milk to get a little cheese." Henri Cartier-Bresson from The Decisive Moment.

  8. #8
    landon9720 is offline Member
    Join Date
    Aug 2008
    Posts
    37

    Default

    i should have been more clear. my (perhaps incorrect) understanding is that raw image pixels are stored in the bayer pattern, and therefore need processing before they can even be displayed on screen. this processing includes some level of sharpening. my thought was that if sharpening must be applied when the raw image is loaded, then the image should be sharpened as much as is desired. this means that the sharpening is effectively applied before most other edits.

    what is the reasoning behind applying sharpening last?

  9. #9
    Marko's Avatar
    Marko is offline Administrator
    Join Date
    May 2005
    Location
    Montreal, QC. Canada
    Posts
    14,870
    My Photos
    Please do NOT edit my photos
    Critiques
    Critique my photos anywhere in the forum

    Default

    The level of sharpening will vary based on the output of the final image.

    A printed image (huge) needs considerably more sharpening than a small web image.

    So I work on my image first, THEN decide if it's going on the web or print etc.
    Therefore, the sharpening is the last thing I do.
    - Please connect with me further
    Photo tours of Montreal - Private photography courses
    - Join the new Photography.ca Facebook page
    - Follow me on Twitter http://twitter.com/markokulik
    - Follow me on Google+ https://plus.google.com/u/0/111159185852360398018/posts
    - Check out the photography podcast


    "You have to milk the cow quite a lot, and get plenty of milk to get a little cheese." Henri Cartier-Bresson from The Decisive Moment.

  10. #10
    Mad Aussie's Avatar
    Mad Aussie is offline Moderator
    Join Date
    Dec 2008
    Location
    Brisbane, Qld, Australia
    Posts
    14,098
    My Photos
    Please ask before editing my photos

    Default

    Quote Originally Posted by marko View Post
    I'd be interested to know more about this pre-sharpening and if others process in this way.
    As I mentioned above ... I do when using Lightroom if you consider the Clarity a sharpening tool. Which the Adobe people at the seminar did in lieu of their lacking sharpening feature in there now. I treat the Clarity as a kind of cross between sharpening and contrast.


    In the end they want to have all the photo editing features of PS inside Lightroom and leave PS as software for someone who does both photo and graphic work whereas Lightroom will be for photo work only and leave no need to export out to PS at all. They have some work to do.

    My real sharpening is done somewhere close the end of my processing in PS.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36