Quote Originally Posted by Marko View Post
Just wanted to add something if memory doesn't fail.


I haven't done this in a while I'll admit, but the F00 is likely displaying as such due to the 'improper' connection between reversed lens to camera.
(I just reread that u are using the kit lens Jude01...I've only used this on a 50mm which is a fab cheap investment on so many levels if you don't already own one)
But in terms of the 50mm, not all new 50mms may not be able to do this but AFAIK, by changing the aperture while the lens is normally placed on the camera, then reversing it - that's the Fstop of the shot. Though I can see that for some lens camera combinations this might not work. Since you have one handy - maybe see if this works for your camera?
Yeah, I had read somewhere and mentioned in my post on this subject that you set the f-stop and hold in the aperture preview switch as you disconnect the lens and the lens stays at the right f-stop. Haven't tried it myself yet.